Skip to content

Table layouts

Every part of the table is yours to arrange: how opponents are placed, how your own board is cut into rows, how much of your hand shows, and where the stack, log and prompt sit. Pick a preset, then adjust. Layouts live only in your browser and are never sent to the server (web/src/lib/layoutprofile.ts:3-6).

Open the Layout drawer from the pill on the centre bar (web/src/components/CentreStrip.svelte:133) or from Game options, Board layout (web/src/components/PlaySettingsPanel.svelte:606). Each control applies at once, so the table behind the drawer is the preview (web/src/components/LayoutDrawer.svelte:50-52).

Presets

A preset sets the opponent arrangement, the opponents' share of the height and your row template. It leaves your card, hand and panel choices alone (web/src/lib/layoutprofile.ts:145, :227).

opponent boardcreatureslandsother permanentsdecision prompt

Duel. One opponent. Creatures on the front row; lands and other permanents share the back row. The default.
Duel, 3 rows. Each of your regions gets its own row. Choose it when you run many noncreature permanents.
Commander 4. Three opponents in columns, a slightly larger opponent share. For a four-seat pod.
6 players, grid. Opponents wrap into two rows once there are more than three. For five or six seats.
8 players, focus. One opponent full size, the rest as slim strips. For big tables.

The preset ids are duel, duel3, cmd4, grid6 and focus8 (web/src/lib/layoutprofile.ts:133-141). duel is the default (:197-209).

Opponent arrangement

You always sit at the bottom. Opponents fill the top in turn order from you, left to right, so the seat to your left reads first. A spectator has no seat, so the lowest seat takes the bottom (web/src/lib/tablearrange.ts:403-411).

Columns. One row, one column per opponent.
Grid. Two rows once there are four or more opponents; with three or fewer it looks like columns.
Focus. One opponent large, the rest as strips. With one opponent it is plain columns.

Choose columns for up to three opponents, grid for five or six seats, and focus when one opponent matters most. Click a side strip to make that opponent the large one (web/src/components/Board.svelte:213, web/src/lib/tablearrange.ts:461-474).

Opponent boards has two settings. Mirrored flips each opponent's rows so their creatures sit nearest the centre, facing yours (the default). Same as mine keeps their rows in your order (web/src/components/Quadrant.svelte:42-45).

The centre bar

Drag the bar between the boards to change the opponents' share of the height, from 18% to 72% (web/src/lib/layoutprofile.ts:63-64). Double-click resets it for the seat count. The grip is also a keyboard separator, so dragging is never required (web/src/components/CentreStrip.svelte:16-21, :113).

Your board

Your permanents sort into three regions: creatures, lands and other permanents. Each region has four settings (web/src/lib/layoutprofile.ts:81-90, web/src/components/LayoutDrawer.svelte:133-167).

  • Row

    Rows 1 to 3. Row 1 is nearest the centre. Regions on the same row share its width.

  • Width

    S, M, L or XL: weights 0.4, 0.7, 1 and 1.6 against the other regions on the row (web/src/lib/layoutprofile.ts:56-61).

  • Fill from

    Left, centre or right. Where the region's cards gather when the row is not full.

  • Order

    Entry order, name or power. Entry order never moves cards already on the table; ties always keep entry order.

Cards

  • Stack identical

    Merges identical permanents into one pile marked with a count. Toggle it with S (web/src/lib/keymap.ts:90).

  • When a row is full

    Overlap tightens the cards, scroll adds a scrollbar, wrap starts a new line (web/src/lib/layoutprofile.ts:26).

  • Art tiles

    Below a card width you choose, cards draw as art tiles. The slider runs from never (0) to 120 px; the default is 58 px (web/src/lib/layoutprofile.ts:72-73, :203).

  • Region outlines

    Draws each region's outline and label. Off by default; useful while you tune rows.

Your hand

The hand is a fan along the bottom edge. Cards keep their size. When the hand is too wide, the cards overlap more, and when it fits they sit apart with a small gap (web/src/lib/handfan.ts:523-541).

  • Hand visible

    How much of each hand card shows at rest, 30% to 100%. The default is 72%.

  • Hand card size

    A multiplier from 0.6x to 1.6x (web/src/lib/layoutprofile.ts:74-77).

  • Rises on hover

    On by default: the card under the pointer lifts to full height.

Stack, log and prompt

The rail holds the stack, the game log and the decision prompt. It can sit on either side, or be hidden for a wider board. Its width runs from 14% to 40% of the window, 21% by default (web/src/lib/layoutprofile.ts:27, :65-66, :178-180).

Right. The default.
Left. Mirrors the rail for left-handed mouse use or a second monitor.
Hidden. The widest board; the stack and log are out of sight.

When the table offers a paired bot, its panel gets a rail of its own. Paired bot has three settings: opposite side (the default) puts that rail on the side of the board away from the stack and log; in the rail keeps the panel inside the main rail; hidden tucks it into a drawer at the opposite edge that slides in when you point at it or tab into it (web/src/lib/layoutprofile.ts:28-29, web/src/lib/partnerrail.ts). Its width is separate from the main rail's: 14% to 30% of the window, 20% by default, so both rails at their widest still leave the board 30% (web/src/lib/layoutprofile.ts:67-69, :182-184). Below 64rem of width the paired bot never takes a column: set to opposite side, it joins the main rail. Without a paired bot the table looks exactly as above.

The log has three settings: per table (remember your last choice for each table), show, or hide (web/src/lib/layoutprofile.ts:30, :52). L toggles it (web/src/lib/keymap.ts:89).

Choose where the decision prompt appears (web/src/lib/layoutprofile.ts:31, :53). While you pay a cost, a prompt set to near table moves to the rail (web/src/lib/prompts/dock.ts:54-57):

Rail top. Prompt above the stack.
Rail bottom. The default.
Near table. The prompt sits by the centre bar.
Floating. Drag it anywhere; the position is saved.

Saved layouts

Save the current layout under a name of up to 24 characters. Saved layouts appear in the drawer's menu and in the cycle list after the presets. Ctrl+Shift+. and Ctrl+Shift+, step through the list. Keys for layouts 1 to 9 exist but start unbound (web/src/lib/keymap.ts:87-88, :23, web/src/lib/layoutlibrary.ts:193-201).

Export writes your saved layouts to gorge-layouts.json. Import adds them back, skipping any it cannot read (web/src/components/LayoutDrawer.svelte:73-90). The library lives at the browser key gorge.layouts.v1, and an older single-layout key is migrated once on first load (web/src/lib/layoutlibrary.ts:36, :99-123).

Motion and effects

Two more drawer settings belong to the browser, not to a layout, so switching layouts never changes them (web/src/components/LayoutDrawer.svelte:193-202):

  • Animations: off, fast or normal (web/src/lib/motion/settings.ts:9-10). A system request for reduced motion turns them off.
  • Visual effects: on or off. Turn them off if your GPU hangs on blur and shadows; ?fx=off in the address does the same (web/src/lib/visualfx.ts:20-21).

Next: Gameplay options.